Cost calculation

the first blinds that appeared on the Windows in Ukraine, horizontal blinds, so almost everybody is familiar with their appearance and device. Horizontal blinds are installed on the window opening to protect from the sun and the regulation of outdoor light flux.

Horizontal blinds consist of transverse plates called lamellae, which are interconnected by a system of threads. This system allows using canes to turn the slats at a certain angle to regulate the intensity of light entering the room, and by means of a cord to raise and lower the blinds, locking them at a certain height.

If before slats horizontal blinds were made only of plastic, now you can order horizontal blinds plastic, aluminum, wood and even leather. The width of the slats can be 16 or 25 mm. Wide color range of slats allows to select blinds for any interior.

Horizontal blinds practical, durable and do not require special care. Closed their smooth surface is easy to clean from dust and other contaminants.

Buy horizontal blinds, the company "Blinds-service" in many cities of Ukraine, besides, since our company is a manufacturer shutter, we set prices on horizontal blinds.

Comparison table
Function	Standard 25/16mm blinds	Blinds system Venus
The rotation of the slats
Full rise up
Sun protection
Protection from view from the street
Protection from the glare of the screen
Plant protection
"Smart governance"
The inclined fixing (included)
Increased durability
Modern design
Simulation of a unified whole with window

Measurement of horizontal blinds

 

1. First, measure the width from joint to joint bead width.

2. Then measure the height from junction stamico to the joint and add 1, see

3. Then select the desired direction for the control knobs, louvers, left or right. (Usually on the edges of the window)

 

1. First, measure the width from joint to joint bead width. 2. Then measure the height from junction stamico to the joint and add 1, see 3. Then select the desired direction for the control knobs, louvers, left or right. (Usually on the edges of the window)

horizontal blinds

 

1. Glazing bead, apply markup so that the brackets were not on the mechanisms at the top of the cornice.

2. Fasten the bracket to the bead of the screw, the length of which does not exceed the thickness of the bead.

3. Return insert the cane into the mechanism and snap the rod into the attachment.

4. Fasten the clips or strings (if ordered)

 

1. Glazing bead, apply markup so that the brackets were not on the mechanisms at the top of the cornice. 2. Fasten the bracket to the bead of the screw, the length of which does not exceed the thickness of the bead. 3. Return insert the cane into the mechanism and snap the rod into the attachment. 4. Fasten the clips or strings (if ordered)

How to order?

to Order blinds or shutters you can in two ways:

• - inviting Gager with samples at a convenient time for you;
• - by making the measurements for the manufacture and installation of blinds on their own, specify them when ordering.

in any order blinds or shutters you will receive comprehensive advice from our experts.